Home News Local News

New cutter visits Columbia River

Named for man involved in daring rescue

By Jack Heffernan

EO Media Group

Published on March 14, 2017 5:59PM

Coast Guard cutter John F. McCormick transits up the Columbia River next to the 52-foot motor lifeboat Triumph II.

Petty Officer 1st Class Levi Read

Coast Guard cutter John F. McCormick transits up the Columbia River next to the 52-foot motor lifeboat Triumph II.

Linda Jarmer, the granddaughter of John F. McCormick, looks over the side of the Coast Guard cutter John McCormick as it is moored at the 17th Street Dock in Astoria.

Linda Jarmer, the granddaughter of John F. McCormick, looks over the side of the Coast Guard cutter John McCormick as it is moored at the 17th Street Dock in Astoria.

Buy this photo
The Coast Guard 52-foot motor lifeboat Triumph II, from Station Cape Disappointment in Ilwaco, runs alongside the Coast Guard Cutter John F. McCormick near Point Adams on the Columbia River Saturday.

Photos by Petty Officer 1st Class Levi Read

The Coast Guard 52-foot motor lifeboat Triumph II, from Station Cape Disappointment in Ilwaco, runs alongside the Coast Guard Cutter John F. McCormick near Point Adams on the Columbia River Saturday.

Buy this photo
Descendants of John F. McCormick stand on the 17th Street Dock in Astoria next to the Coast Guard Cutter John McCormick during the cutter’s visit to the area en route to its homeport of Ketchikan, Alaska.

Descendants of John F. McCormick stand on the 17th Street Dock in Astoria next to the Coast Guard Cutter John McCormick during the cutter’s visit to the area en route to its homeport of Ketchikan, Alaska.

Buy this photo

Nearly 80 years after and roughly 2 miles east of the site of her grandfather’s daring rescue mission, Linda Jarmer could have been mistaken for a U.S. Coast Guard crew member herself.

A motor lifeboat glided east along the Columbia River on Saturday morning next to the soon-to-be commissioned John F. McCormick Sentinel-class cutter. While the vessels were still in motion, Jarmer, whose grandfather is the boat’s namesake, took a wide step from the lifeboat onto the cutter while dressed in a large, orange dry suit.

Jarmer made her way to the top deck to meet the 24 crew members on board. “It’s only right you came aboard the John F. McCormick that way,” Lt. J.G. Joe Petry said.

The 154-foot fast response cutter left Key West, Florida, five weeks ago and will dock at its home port in Ketchikan, Alaska, next week. There, a commissioning ceremony will take place in April. Another cutter, the Bailey T. Barco, will be commissioned there in June.

Following the ceremony, the cutter will begin sea rescue and commercial fishing enforcement missions.


Two may dock here


The John F. McCormick is one of 21 Sentinel-class cutters — the first on the West Coast — that have been put to use by the Coast Guard. Out of the 58 planned cutters, two may be stationed with Coast Guard Sector Columbia River.

The newest cutter was at Astoria’s 17th Street Dock this past weekend and left for its final destination Monday. The public was invited to tour the ship Sunday.

McCormick was a commanding officer on the wooden motor lifeboat Triumph — stationed in Hammond — in March 1938 when he rescued a crew member who fell overboard. He received the Gold Lifesaving Medal for the rescue.

Jarmer, 56, of Portland, said her grandfather did not talk about the rescue much to her or her three sisters, preferring to remember it as just part of his job. She coordinated with the crew to develop the ship’s crest, which includes a salmon drawing commemorating McCormick’s love for fishing.


Top speeds


Near the time of McCormick’s death at 85 in 1986, the new 110-foot Island-class patrol boats were just being commissioned. Three decades later, the cutters are replacing many of these boats.

“I think he’d be amazed at the ship and everything it has on it,” Jarmer said.

The most noticeable upgrade from the Island-class is the ability to maintain top speeds. Both boats can reach speeds of roughly 30 knots, but the 20-cylinder engine on the Sentinel-class cutter allows it to maintain those speeds for a longer distance. Three generators significantly reduce the possibility of it losing power.

The cutter also holds a 26-foot stern launch boat that can glide from a lowered platform on the back of the vessel into the water. Its ability to slide into the water as opposed to being lowered allows crew members to use it on larger swells.

“We can get there farther and faster and once we’re at a scene, it makes it much easier to do law enforcement,” said Lt. Mike Moyseowicz, the cutter’s commanding officer.

Upgraded communication and electronic capabilities allow the cutter to function more independently, allowing the crew to handle certain tasks themselves rather than asking questions of a nearby station over radio.

“The technology just supersedes any other platform in the Coast Guard fleet,” electrician’s mate Pat Connolly said. “It blows your mind the stuff this boat can do.”

Upgrades to the living quarters such as separated toilets and showers make it easier for the cutter to incorporate men and women, Moyseowicz said. Three pictures of McCormick also adorn the wall next to the mess tables.

Crew members said Saturday that meeting McCormick’s family and sailing past the site of the rescue was a fitting last stop before the commissioning ceremony.

“It really adds that much more of a personal touch to it,” Moyseowicz said. “For the crew, it adds that much more camaraderie. It’s inspirational to add that much more of his legacy.”



Marketplace

Share and Discuss

Guidelines

User Comments